Welcome To Pacific Pump Group Co., Ltd
Product
- Product Parameters
Technical parameters :
2SK series double-stage liquid ring vacuum pump
| type | suction amount （m3/min） | utmost pressure | power (kw) | rotary speed(r.p.m) | supplied water amoun(L/min) | caliber of the suction port and drain port | ||
max | when the suction pressure is －0.093Mpa, it is no less than | mmHg | MPa | |||||
| 2SK-1.5 | 1.5 | 0.9 | -730 | -0.097 | 4 | 1440 | 10～15 | φ40 |
| 2SK-3 | 3 | 2 | -735 | -0.098 | 7.5 | 1440 | 15～20 | φ40 |
| 2SK-6 | 6 | 4 | -735 | -0.098 | 15 | 1460 | 25～35 | φ70 |
| 2SK-12 | 12 | 8 | -735 | -0.098 | 22 | 970 | 40～50 | φ100 |
| 2SK-30 | 20 | 14 | -735 | -0.098 | 45 | 740 | 60～80 | φ125 |
| 2SK-30 | 30 | 20 | -735 | -0.098 | 55 | 740 | 70～90 | φ125 |
2Sk－P1 series double-stage liquid ring vacuum pump------air ejecting pump unit
| type | suction amount（m3/min） | utmost pressure | power (kw) | rotary speed(r.p.m) | supplied water amoun(L/min) | pump body material | |||
| when the suction pressure is －0.093Mpa(-700mmHg) | when the suction pressure is －0.097Mpa(-700mmHg) | when the suction pressure is －0.099Mpa(-700mmHg) | mmHg | MPa | |||||
| 2SK-1.5P1 | 1.05 | 0.9 | 0.75 | -750 | -0.099 | 4 | 1440 | 10～15 | stainless steel |
| 2SK-3P1 | 2.1 | 1.8 | 1.5 | -750 | -0.099 | 7.5 | 1440 | 15～20 | stainless steel |
| 2SK-6P1 | 4.2 | 3.6 | 3 | -750 | -0.099 | 15 | 1460 | 25～35 | stainless steel |
| 2SK-12P1 | 8.4 | 7.2 | 6 | -750 | -0.099 | 22 | 970 | 40～50 | stainless steel |
| 2SK-20P1 | 14 | 12 | 10 | -750 | -0.099 | 45 | 740 | 60～80 | stainless steel |
| 2SK-30P1 | 21 | 18 | 15 | -750 | -0.099 | 55 | 740 | 70～90 | stainless steel |
Note:
1. The value in the table is obtained under the following condition: ① air pressure is 0.1013Mpa（760mmHg）; ② inlet water temperature is 20℃; ③ relative air humidity is 70％.
2. The value is obtained when the
supplied water amount is the suction pressure 0.05Mpa(－400mmHg). It can
be bigger than this when it reaches utmost vacuum.
3. The performance difference will not exceed ±10％.
